Showing 1–18 of 47 results


  • Armour Bodies bodywork has award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every single category in the Roadracing World bodywork comparison. This bodywork was rated to have exceptional fit, the highest durability and was #1 in surface finish and flexibility.

    Armour Bodies is top quality bodywork that is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. We use only large sheets of fiberglass with minimal use of mill fiber – giving the part the best possible structural integrity. Each part is then hand sanded, individually fit together and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way. The labor we put into the finish can save over $100 in prep time over other brands, as your painter will only have to give the bodywork a scuff before painting. The toughness of our large sheet fiberglass design together with our unique resin can help keep you on track after a fall – many riders are done for the day after cheap bodywork is left in shambles on the side of the track. Finally, our resin is fully compatible with commonly available fiberglass repair kits, giving your repairs much more strength and reducing the likelihood for the delamination common in repairs of other premium bodywork brands.

    NOTE: This kit requires an aftermarket wind-screen.

    Add to cart
  • * Armour Bodies race/track fairings
    *Suberbike edition – tail replaces OEM seat & ready for seat pad
    * Pro-Series bodywork
    * Best-rated bodywork for surface finish and flexibility

    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment, and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    5 Pieces (front wheel fender, upper fairing, belly pan/lowers, tank cover, & superbike tail)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2005 Honda CBR600RR
    2006 Honda CBR600RR

    Add to cart
  • 02-03 Yamaha R1 Fiberglass Race Fairings for the Track
    Fits: 2002-2003 Yamaha R1
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2002 Yamaha YZF-R1
    2003 Yamaha YZF-R1

  • 03-04 Honda CBR600RR Fiberglass Race Fairings for the Track
    Fits: 2003-2004 Honda CBR600RR
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2003 Honda CBR600RR
    2004 Honda CBR600RR

    Add to cart
  • 03-05 Ducati 749, 999 Fiberglass Race Fairings for the Track
    Fits: 2003-2005 Ducati 749, 999
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2003 Ducati 749, 999
    2004 Ducati 749, 999
    2005 Ducati 749, 999

  • 04-05 Honda CBR1000RR Fiberglass Race Fairings for the Track
    Fits: 2004-2005 Honda CBR1000RR
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2004 Honda CBR1000RR
    2005 Honda CBR1000RR

  • 04-05 Suzuki GSXR-600 & GSXR-750 Fiberglass Race Fairings for the Track
    Fits: 2004-2005 Suzuki GSXR-600 & GSXR-750
    Pieces: 5 (front fender, upper, lower, seat, undertail)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2004 Suzuki GSXR-600 & GSXR-750
    2005 Suzuki GSXR-600 & GSXR-750

  • 07-08 Suzuki GSXR-1000 Fiberglass Race Fairings for the Track
    Fits: 2007-2008 Suzuki GSXR-1000
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2007 Suzuki GSXR-1000
    2008 Suzuki GSXR-1000

  • 07-11 Honda CBR600RR Fiberglass Race Fairings for the Track
    Fits: 2007-2011 Honda CBR600RR
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint
    tank cover is optional

    Fits the Following Models

    2007 Honda CBR600RR
    2008 Honda CBR600RR
    2009 Honda CBR600RR
    2010 Honda CBR600RR
    2011 Honda CBR600RR

  • 98-02 Yamaha R6 Fiberglass Race Fairings for the Track
    Fits: 1998-2002 Yamaha R6
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    1998 Yamaha YZF-R6
    1999 Yamaha YZF-R6
    2000 Yamaha YZF-R6
    2001 Yamaha YZF-R6
    2002 Yamaha YZF-R6

    Add to cart
  • 06-07 Yamaha R6 Fiberglass Race Fairings for the Track
    Fits: 2006-2007 Yamaha R6
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2006 Yamaha YZF-R6
    2007 Yamaha YZF-R6

  • 08-11 Honda CBR1000RR Fiberglass Race Fairings for the Track
    Fits: 2008-2012 Honda CBR1000RR
    Pieces: 5 (front fender, upper, lower, seat, undertail)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2008 Honda CBR1000RR
    2009 Honda CBR1000RR
    2010 Honda CBR1000RR
    2011 Honda CBR1000RR
    2012 Honda CBR1000RR

  • 09-11 Suzuki GSXR-1000 Fiberglass Race Fairings for the Track
    Fits: 2009-2012 Suzuki GSXR-1000
    Pieces: 4 (front fender, upper, lower, seat)
    High cuality construction, that is AMA-Ready

    Lightweight construction (around 5 lb)
    Flexible resin material construction
    Smooth white gel coat finish
    Kevlar & carbon fiber reinforced mounting points
    Oil Catch Belly Pan
    Heat shield included
    ready for direct installation or paint

    Fits the Following Models

    2009 Suzuki GSXR-1000
    2010 Suzuki GSXR-1000
    2011 Suzuki GSXR-1000

  • Armour Bodies PRO-Series Fiberglass Bodywork: 01-03 Honda CBR600 F4i
    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    4 Pieces (front wheel fender, upper fairing, belly pan/lowers & Supersport tail)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2001 Honda CBR600 F4i
    2002 Honda CBR600 F4i
    2003 Honda CBR600 F4i

    About Armour Bodies Bodywork
    Armour Bodies award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every category in the Roadracing World bodywork comparison. This bodywork has exceptional fitment, the highest durability, and was rated #1 in surface finish and flexibility.

    Armour Bodies Pro-Series Fairings top of the line bodywork is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. Only large sheets of fiberglass with minimal use of mill fiber are used, giving the fairings the best possible structural integrity. Each part is then hand sanded, individually fit together, and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way with faster prep time, paint, installation.
    The painter will just have to give the bodywork a scuff before painting.
    Large sheets fiberglass together with unique resin are designed to keep you on track after a fall
    The resin is fully compatible with commonly available fiberglass repair kits

  • Armour Bodies PRO-Series Fiberglass Bodywork: 02-03 Yamaha YZF-R1
    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    4 Pieces (front wheel fender, upper fairing, belly pan/lowers, & Supersport tail)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2002 Yamaha YZF-R1
    2003 Yamaha YZF-R1

    About Armour Bodies Bodywork
    Armour Bodies award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every category in the Roadracing World bodywork comparison. This bodywork has exceptional fitment, the highest durability, and was rated #1 in surface finish and flexibility.

    Armour Bodies Pro-Series Fairings top of the line bodywork is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. Only large sheets of fiberglass with minimal use of mill fiber are used, giving the fairings the best possible structural integrity. Each part is then hand sanded, individually fit together, and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way with faster prep time, paint, installation.
    The painter will just have to give the bodywork a scuff before painting.
    Large sheets fiberglass together with unique resin are designed to keep you on track after a fall
    The resin is fully compatible with commonly available fiberglass repair kits

  • Armour Bodies PRO-Series Fiberglass Bodywork: 03-04 Honda CBR600RR
    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment, and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    5 Pieces (front wheel fender, upper fairing, belly pan/lowers, tank cover, & superbike tail)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2003 Honda CBR600RR
    2004 Honda CBR600RR

    About Armour Bodies Bodywork
    Armour Bodies award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every category in the Roadracing World bodywork comparison. This bodywork has exceptional fitment, the highest durability, and was rated #1 in surface finish and flexibility.

    Armour Bodies Pro-Series Fairings top of the line bodywork is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. Only large sheets of fiberglass with minimal use of mill fiber are used, giving the fairings the best possible structural integrity. Each part is then hand sanded, individually fit together, and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way with faster prep time, paint, installation.
    The painter will just have to give the bodywork a scuff before painting.
    Large sheets fiberglass together with unique resin are designed to keep you on track after a fall
    The resin is fully compatible with commonly available fiberglass repair kits

  • Armour Bodies PRO-Series Fiberglass Bodywork: 03-05 Yamaha YZF-R6
    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    4 Pieces (front wheel fender, upper fairing, belly pan/lowers, choice of tail,)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2003 Yamaha YZF-R6
    2004 Yamaha YZF-R6
    2005 Yamaha YZF-R6
    2006 Yamaha YZF-R6S
    2007 Yamaha YZF-R6S
    2008 Yamaha YZF-R6S
    2009 Yamaha YZF-R6S

    About Armour Bodies Bodywork
    Armour Bodies award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every category in the Roadracing World bodywork comparison. This bodywork has exceptional fitment, the highest durability, and was rated #1 in surface finish and flexibility.

    Armour Bodies Pro-Series Fairings top of the line bodywork is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. Only large sheets of fiberglass with minimal use of mill fiber are used, giving the fairings the best possible structural integrity. Each part is then hand sanded, individually fit together, and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way with faster prep time, paint, installation.
    The painter will just have to give the bodywork a scuff before painting.
    Large sheets fiberglass together with unique resin are designed to keep you on track after a fall
    The resin is fully compatible with commonly available fiberglass repair kits

  • Armour Bodies PRO-Series Fiberglass Bodywork: 03-07 Ducati 749, 999
    If you are looking for premium quality bodywork, we recommend Armour Bodies. Superior construction, fitment and ultra-flexible primer set these race fairings apart from the rest.

    AMA-Ready Bodywork Construction

    4 Pieces (front wheel fender, upper fairing, belly pan/lowers, & Supersport tail)
    Lightweight construction (around 5 lb)
    Ultra-Flexible resin material construction
    Smooth high-quality primered finish
    Oil Catch Belly Pan

    Fits the Following Models

    2003-2007 Ducati 749, 999

    About Armour Bodies Bodywork
    Armour Bodies award-winning fit and finish that took the industry by storm when Armour Bodies scored among the leaders in every category in the Roadracing World bodywork comparison. This bodywork has exceptional fitment, the highest durability, and was rated #1 in surface finish and flexibility.

    Armour Bodies Pro-Series Fairings top of the line bodywork is made with unique resin derived from the Kayak racing industry, giving it the ability to withstand the rigors of the racetrack. Only large sheets of fiberglass with minimal use of mill fiber are used, giving the fairings the best possible structural integrity. Each part is then hand sanded, individually fit together, and finished in a high quality primer that is ready for paint after a light scuff.

    This bodywork will save you time and money every step of the way with faster prep time, paint, installation.
    The painter will just have to give the bodywork a scuff before painting.
    Large sheets fiberglass together with unique resin are designed to keep you on track after a fall
    The resin is fully compatible with commonly available fiberglass repair kits


Showing 1–18 of 47 results

How its work
reason
Live Help